8BCraft Forum

Hi,
Have you checked if the raspberry pi is in the right position?

have a look here :
https://www.8bcraft.com/trouble-shooting-FAQ/

send me an email if you still have problem.

Do you have no sound at all or little? If sound is not loud enought there's a setting in retropie to increase the volume. If no sound at all do you have when you plug headphones? The sound goes like this : RPI zero -> headphones -> amplifier -> speaker If you have no voice at all it's likely config....

First order number by default on woocommerce is about 330 so in fact you'r one of the first after-kickstarter backer.

If you have any trouble with your kit, please send me an email at hello@8bcraft.com because I'm getting messages from everywhere it's hard to deal with them!

Hi, It might be either the pogo pins that are not exactly in the right position (during SMT solder maybe they moved a bit) so soldering would solve the issue. However maybe the USB hub IC has a problem, then if you solder you will solder you pi to a non working PCB. What could be interesting is to s...

So is it working now or do you still have problems?

Is it black or blue/white ? Have you checked that the pi sits in the right position? Have you tried plugging HDMI cable into the raspberry pi zero to see if it's running OK? Can you probe with a flashlight (phone flashlight) inside the LCD when turning on if you can see if the LCD has signal? Maybe ...

Hi, I'll try to find root problem with you. As you'r saying it does not work when you plug HDMI right? So I think the problem comes from the pi or the SD. The hard boot can corrupt data, but it does not happen often. Can you try to take use the raspberry pi zero alone with a HDMI screen? That way we...

Hey guys,

Very quick news, the extra-USB kit are ready!

Hey guys, Sorry I have not posted news for a long time, mainly because I had to deal with logistics and discussion with suppliers that required frustrating long time to set up. And it is quite fastidious to write down without being very boring! But I will try my best to give you interesting news: Fo...

Hey guys, Quick follow up since last update. I have corrected the A B X Y buttons holes, so now the buttons are working smoothly ! https://ksr-ugc.imgix.net/assets/015/628/430/07005c49fe650e7a9e90bd578eb0fb83_original.JPG?w=639&fit=max&v=1487954812&auto=format&q=92&s=4cd0ea0d9885...