8BCraft Forum

pho-tos! pho-tos! pho-tos!



Sounds brilliant mate, would love to see it!

Thanks Pierre. Have followed your steps on both the Raspiboy (pin11) & my RPi3 (pin5). The Raspiboy reports nothing. :( The RPi3 reports the following; :mrgreen: pi@retropie:~ $ sudo nano /boot/test.py pi@retropie:~ $ sudo python /boot/test.py /boot/test.py:8: RuntimeWarning: A physical pull up ...

Ok, so I rigged up an arcade button to my RPi3 to pins 5 & 6 and followed the tutorial by barryhubbard. http://www.barryhubbard.com/raspberry-pi/howto-raspberry-pi-raspbian-power-on-off-gpio-button/ This works perfectly on my RPi3! I followed the steps again for my Raspiboy and altered the scrip...

Great post. I tried this as well as the soft shutdown post viewtopic.php?f=2&t=1616
but neither are working for me. I will try these on my Pi3 hopefully tomorrow. If that works then maybe I have a faulty PCB?

zzeb wrote:Thank You ! It's work !!

Great!

Vilikt wrote:Try to add

Code: Select all

(sleep 10;python /home/pi/off-button.py) & 

instead of simply

Code: Select all

python /home/pi/off-button.py &

Thank you for your advice. Still no joy i'm afraid...

BTW, what does 'sleep 10;' do to the code?

Thanks for this breeman

I have followed this to the letter and it still won't work for me!

Is it possible my BIB is not actually connected to ground/faulty?

I have tried this so many times now.

Thanks trantornator

Finally got round to doing this and your edits work a treat.

I used nano and terminal to edit the cfg file as I couldn't edit the file over cyberduck and ssh.

Cheers!

If using a RetroArch emulator, you can switch the main controller in RetroArch settings. Make sure you have configured the USB controller in Emulationstation. Open a rom Press Select+X to open RA settings Make sure you are back at MAIN MENU Got to Settings/Input/Input User 1 Binds Scroll down to ‘Us...

Hi Thomas

Thanks for this!

Have tried the steps but no joy.

Have you tried this successfully?

Cheers