8BCraft Forum

Thanks for the tips. I didn't know 'Sugru' I will buy one and I will try it. Thanks!!

Hi Flodez33,

recheck the flat cable from display to the board. In the pic seems that is not correctly inserted. You have to put it more straight in the board side.

Thanks screech I try to install version 4.0.1 and I will share my experience.

Hi Silversurfer79,

Are you triying to play a Arcade Game in MAME? Could you try a rom of other systems (snes for example)? Maybe is the insert coin button not mapped correctly to MAME.

Hi,

In my Raspi boy when I turned on the poweron switch the device never start the boot process (seems no power left). Battery is a full charge. I have to do a poweroff and poweron again to the device and after it works properly. Anybody with the same issue?

Mine,

14x13.1x4.3cm more ore less.

I changed the dpad membrane for a old snes pad and now works smooth. I think the membrane is too new and a little bit hard. Maybe with time and use it become more smooth.

Thanks screech. Only one question. When you say 4.1 do you want to say 4.0.1? I don't found version 4.1.

https://github.com/recalbox/recalbox-os/releases

Thanks screech. Only one question. When you say 4.1 do you want to say 4.0.1? I don't found version 4.1.

https://github.com/recalbox/recalbox-os/releases

Hi, when I began to play the console the first time, It didn't recognize the main controller. I made a hard reboot and worked without problems. After a long travel by car the console never found back the main controller again. My solution; open the case a reseat the two pcb and ajust the pogo pins, ...