Anybody know how to configure the extra button for a shutdown?
Thanks
Extra Gpio Config for Shutdown
-
- Posts: 7
- Joined: Tue 21 Aug 2018 03:59
Re: Extra Gpio Config for Shutdown
I used this site to add an on/off(shutdown) button to my raspberry pi's. It works flawlessly but I'm not sure if it'll translate to that button on retrostone.
https://howchoo.com/g/mwnlytk3zmm/how-t ... spberry-pi
https://howchoo.com/g/mwnlytk3zmm/how-t ... spberry-pi
Re: Extra Gpio Config for Shutdown
I created a post on RetrOrangePi forum for this: http://orangepi.club/showthread.php?tid=2674
-
- Posts: 7
- Joined: Tue 21 Aug 2018 03:59
Re: Extra Gpio Config for Shutdown
This worked for me. Thanks!
For those who are new to all this:
1. Hook up a BT or USB keyboard
2. Once booted, hit F4 to get to the terminal
3. Run the built in text editor, nano, by typing:
sudo nano /home/pi/RetroPie/retropiemenu/RetrOrangePi/GPIO/Reboot_RS.sh
4. Change "sudo reboot" to "sudo poweroff"
5. Hit Ctrl-X (to Exit), Y (Yes, to save), Enter (to save over existing file)
6. type "exit" to exit terminal and restart RetrOrangePi
For those who are new to all this:
1. Hook up a BT or USB keyboard
2. Once booted, hit F4 to get to the terminal
3. Run the built in text editor, nano, by typing:
sudo nano /home/pi/RetroPie/retropiemenu/RetrOrangePi/GPIO/Reboot_RS.sh
4. Change "sudo reboot" to "sudo poweroff"
5. Hit Ctrl-X (to Exit), Y (Yes, to save), Enter (to save over existing file)
6. type "exit" to exit terminal and restart RetrOrangePi