i have all the parts put together.. NOW.. how in the heck do i get the two halves to fit together?
The Screen keeps moving.. the board keeps popping off.... the little white nubs for the back buttons keep falling out....
i have been at this for the last 3 hours... Please Help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thanks, David, ThunderBoyDavid
Every Fear Hides A Wish
Tips on Getting the Two Halves Together
- ThunderBoyDavid
- Posts: 9
- Joined: Mon 18 Sep 2017 05:10
Tips on Getting the Two Halves Together
Every Fear Hides A Wish
- channel419
- Posts: 7
- Joined: Wed 20 Sep 2017 01:35
Re: Tips on Getting the Two Halves Together
I used this video. You may have already watched.
https://www.youtube.com/watch?v=I2ZsJX6UcY4&t=618s
I put mine together more upright. My back button pads fell out too. Make sure your buttons pop into place. I already had my glue gun out from adding in an extra usb port so added a bit to the hinges to give a bit more resistance. This helped the pads stay in place. Also recommend putting in just one screw when you put it together so you can make sure all your buttons feel OK.
Also be careful with the small ribbon cables going to the shoulder button contacts. They feel a bit weak. Will be a pain if your not good at soldering if you break it.
https://www.youtube.com/watch?v=I2ZsJX6UcY4&t=618s
I put mine together more upright. My back button pads fell out too. Make sure your buttons pop into place. I already had my glue gun out from adding in an extra usb port so added a bit to the hinges to give a bit more resistance. This helped the pads stay in place. Also recommend putting in just one screw when you put it together so you can make sure all your buttons feel OK.
Also be careful with the small ribbon cables going to the shoulder button contacts. They feel a bit weak. Will be a pain if your not good at soldering if you break it.
Re: Tips on Getting the Two Halves Together
I realized that I had to press the L and R buttons over the hinge side so they fit in their hole.