First boot

Here is all the tutorials, FAQ and support for RaspiBoy Kit
Post Reply
ostof
Posts: 1
Joined: Thu 14 Dec 2017 11:08

First boot

Post by ostof »

I assabled my raspiboy today and booted it for the first time. But the was just white then red then green then blue and that repeats.
What could be wrong?
Kyle
Posts: 2
Joined: Mon 18 Dec 2017 17:20

Re: First boot

Post by Kyle »

Have you tried plugging it into a monitor and checking that everything is fine with the raspberry pi? My Raspiboy had a bad connection over the pogo pins at first but it didn't act in the way your describing.
LeedysLtd
Posts: 1
Joined: Fri 22 Dec 2017 16:30

Re: First boot

Post by LeedysLtd »

I have the same problem, it's just plain white/blue for me.
User avatar
Admin
Administrateur du site
Posts: 505
Joined: Sat 10 Dec 2016 13:12

Re: First boot

Post by Admin »

Hi,
If LCD is going to different colors, like green red ...
it means the LCD ribbon is not connected correctly, or has been damaged.

If blue/white LCD check the trouble shooting. If nothing helps and device works on HDMI it means pogo pins don't make contact correctly and pcb needs to be replaced. https://www.8bcraft.com/trouble-shooting-faq/
Post Reply