Retrostone charging

Here is all the tutorials, FAQ and support for RetroStone
Post Reply
PestHit
Posts: 1
Joined: Thu 21 Jan 2021 14:40

Retrostone charging

Post by PestHit »

I connected up my RetroStone to my Samsung mobile phone charger, which is supposed to output 5V 2A.
At first, only the bottom led lit up. After few hours, second led lit up with bottom led still lit. After that it charged for 10 hours and still only 2 leds.
So I disconnected it and connected it again, now the bottom led is not lit but second led is lit, and it has not moved after a few hours.

What kind of charger I should be using or is it faulty hardware?
Last edited by PestHit on Mon 25 Jan 2021 12:19, edited 1 time in total.
Sakib
Posts: 128
Joined: Wed 19 Dec 2018 14:43

Re: Retrostone charging

Post by Sakib »

To charge the retrostone you need at least 1.5A.

Regarding your samsung charger can you check on it what is it’s A rating? To charge RetroStone you need a charger 5V, 1.5A(or more)

Can you please check if your samsung charger is 1.5A or more?

Also if you can try another microUSB charger? as sometimes it can be related to the charger and confirm.
Sakib
Posts: 128
Joined: Wed 19 Dec 2018 14:43

Re: Retrostone charging

Post by Sakib »

Also please after send future feedback directly here :
https://www.8bcraft.com/my-tickets/
For faster reply.
Sakib
Posts: 128
Joined: Wed 19 Dec 2018 14:43

Re: Retrostone charging

Post by Sakib »

Also please after send future feedback directly here :
https://www.8bcraft.com/my-tickets/
For faster reply.
Post Reply