Page 1 of 1

Retrostone charging

Posted: Thu 21 Jan 2021 14:43
by PestHit
I connected up my RetroStone to my Samsung mobile phone charger, which is supposed to output 5V 2A.
At first, only the bottom led lit up. After few hours, second led lit up with bottom led still lit. After that it charged for 10 hours and still only 2 leds.
So I disconnected it and connected it again, now the bottom led is not lit but second led is lit, and it has not moved after a few hours.

What kind of charger I should be using or is it faulty hardware?

Re: Retrostone charging

Posted: Sat 23 Jan 2021 13:07
by Sakib
To charge the retrostone you need at least 1.5A.

Regarding your samsung charger can you check on it what is it’s A rating? To charge RetroStone you need a charger 5V, 1.5A(or more)

Can you please check if your samsung charger is 1.5A or more?

Also if you can try another microUSB charger? as sometimes it can be related to the charger and confirm.

Re: Retrostone charging

Posted: Sat 23 Jan 2021 13:11
by Sakib
Also please after send future feedback directly here :
https://www.8bcraft.com/my-tickets/
For faster reply.

Re: Retrostone charging

Posted: Sat 23 Jan 2021 13:11
by Sakib
Also please after send future feedback directly here :
https://www.8bcraft.com/my-tickets/
For faster reply.