assembled my kit today and it WAS working but i wanted to put a larger card into my piZero so i disassembled it. now the system won't load and i get no screen output or sound or signs of life in general except for the right most two battery/power LEDs light up and the heatsink on the raspiboy board near the microUSB port gets REALLY HOT if any power is applied to the system (batter or USB).
the piZero works fine tho as i can take it out of the case and hook it up to a monitor and power it up fine. so its something in the enclosure. any know how to test either the raspiboy board or the LCD separately to try to track down my issue?
are there known compatibility issues with raspian 4.3? i guess i can try going thru the install steps EXACTLY one more time.
assembled today, worked maybe twice, now dark and hot
Re: assembled today, worked maybe twice, now dark and hot
Hi,
I think there's a short cut with your PCB, please contact me by email at hello@8bcraft.com for replacing the PCB.
I think there's a short cut with your PCB, please contact me by email at hello@8bcraft.com for replacing the PCB.